Bases

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle acquisition while wearing electronic EarPro/communications...

A/T Optic Riser 525-5 is approximately 2-1/8" long and is intended to be used with a red dot or other single optic or accessory. This riser has 5 recoil slots (6 lugs). All of BCM risers are the same .525 of rise over the top surface of the upper...

A/T Optic Riser 525-13x5 is approximately 7-1/4" long and is intended to be used similarly to the 525-10x5 but offers 3 additional recoil slots for more flexibility. This riser has 13 recoil slots on the main body, and 5 on the cantilever section for a...

A/T Optic Riser 525-13 is approximately 5-3/4" long and covers the entire length of an upper receiver and offers one more recoil slot than the upper. This riser has 13 recoil slots (14 lugs). It can be used with any combination of sights, NVG, or thermal...

A/T Optic Riser 525-11 is approximately 4-1/2" long and is intended to be used with an optic backed up by a magnifier or NVG or thermal depending on the number of recoil slots the mount takes up. This riser has 11 recoil slots (12 lugs). Optimized for...

A/T Optic Riser 525-10x5 is approximately 6-1/8" long and offers a cantilever section for applications where the end user desires to run an attachment or optic over the handguard while avoiding 'bridging' the optic from the upper to the handguard. This...

The Bergara 30 MOA short action rail will come with both 6x48 and 8x40 screws.Finish: MatteMPN: BA0014Type: 1 Piece BaseColor: Black

The Bergara 20 MOA short action rail will come with both 6x48 and 8x40 screws.Fit: Remington 700MPN: BA0008Type: 1 Piece BaseColor: Black

The ARMASPEC ELEV8 Series Optic Risers offers a secure and precise solution for lifting holographic and optics that are mounted directly on a Picatinny rail with a standard lower 1/3 co-witness mount. It raises these optics to a precise height,...

The AD-170-VPG provides a QD solution for a picatinny rail, offering a .60" rise above the mounting surface. Overall length is 2.3". It accepts all VPG bolt on rails that come in both 3 lug and 5 lug variations. It is precision machined from 6061 T6...

Designed to fit 2017 or newer Christensen Arms right handed receivers (or any standard Remington 700 based action), Christensen's in house One Piece Scope Base for STD Remington 700 actions will provide you the benefit of accurate shooting when you need...

Designed to fit 2017 or newer Christensen Arms right handed receivers (or any standard Remington 700 based action), Christensen's in house One Piece Scope Base for STD Remington 700 actions will provide you the benefit of accurate shooting when you need...