Suppressor Accessories

The 3-Lug Mount is a quick-attach mounting option for guns with fixed barrels. The 3-Lug Mount must be used with a 3-Lug Muzzle Device. The 9MM 3-Lug Mount must be used only with 9MM 3-Lug Mount Muzzle Devices.MANUFACTURER: SilencerCoMPN: AC2447MODEL:...

Replace the Front Cap on your Omega 300 or Hybrid 46 with a SilencerCo Bravo Anchor Brake. The Anchor brake improves sound reduction and mitigates recoil, allowing the shooter to re-acquire the target for faster follow-up shots. Bravo accessories are...

Convert your SRD9 or SRD45 suppressor to a 1/2x28 Right Hand thread pitch with the SRD-PISTON-12X28. The piston is made of 17-4 heat treated stainless steel with a matte glass bead finish. The piston will fit a variety of hosts, and it is a perfect...

The Charlie Atlas provides a mount interface for suppressors using Charlie threads, like the SilencerCo Saker, Omega 36M, Hybrid 46M or Chimera 300.MANUFACTURER: ReardenMPN: 10262MODEL: Charlie AtlasFinish: NitrideFit: CharlieType: MountColor: Black

Rearden was founded with a simple mission: be great and innovate. They have never been one to back down from a challenge or say something can't be done. Can't is not a part of their vocabulary. The Atlas provides a mount interface for suppressors with...

Rearden was founded with a simple mission: be great and innovate. They have never been one to back down from a challenge or say something can't be done. Can't is not a part of their vocabulary. The Atlas provides a mount interface for suppressors with...

Rearden was founded with a simple mission: be great and innovate. They have never been one to back down from a challenge or say something can't be done. Can't is not a part of their vocabulary. The Atlas provides a mount interface for suppressors with...

Made to work with industry standard 1.375x24 threaded suppressors the ZR0 DTA was made to add as little length to the system as possible while being as light as possible. Made from 6Al-4V grade 5 titanium and finished with a dark gray rainbow PVD coating...

Made to work with industry standard 1.375x24 threaded suppressors the ZR0 DTA was made to add as little length to the system as possible while being as light as possible. Made from 6Al-4V grade 5 titanium and finished with a dark gray rainbow PVD coating...

The midway adapter is the red headed step child of adapters. It's in the middle, hence the name. It doesn't reflex all the way over the barrel like the OTB series but it also doesn't add full length to the barrel like the PTB series. This adapter is for...

One piece Over The Barrel (OTB) adapter for ops inc 12th model, AEM5 and OCM5. Made from H900 heat treated 17-4 steel this one piece adapter will allow you to mount your silencer to any barrel with 1/2x28 threads that is .75 OD or less with a minimum of...

One piece Past The Barrel (PTB) adapter for ops inc 12th model, AEM5 and OCM5. Made from H900 heat treated 17-4 steel this one piece mount will allow you to mount your silencer to any 1/2x28 barrel that the O.T.B. adapter will not. Barrels with a OD...