Lee

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.Brand: LeeUPC: 734307900236MPN: 90023Department: ReloadingModel: Shell...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.Brand:...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.Brand:...

Lee 45 COLT Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.265 to 1.285 inches.Brand: LeeUPC:...

Lee 7X57 MAUSER Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.215 to 2.235 inches.Brand:...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.Brand:...

Lee 7MM/08 Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.015 to 2.035 inches. Note- the 7mm...

Lee 22/250 Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.Trim to length 1.892 to 1.912 inches.Brand: LeeUPC:...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.Brand: LeeUPC: 734307902001MPN: 90200Department: ReloadingModel: Shell...

The Quick Change Bushings make changing dies a snap and accomplishes the task in seconds. Once mounted on your die, you'll never have to adjust the die again unless you want to.Brand: LeeUPC:...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.Brand: LeeUPC: 734307900175MPN: 90017Department: ReloadingModel: Shell...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.Brand: LeeUPC: 734307902070MPN: 90207Department: ReloadingModel: Shell...