Lee

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.Brand: LeeUPC:...

Assure your mixed brass is bulge free with the Bulge Buster Kit and appropriate Lee Factory Crimp Die. This push-through die adapter will quickly remove the annoying bulge rings that shell...

Lee Load-All II complete reloading tool for 12 gauge with 24 shot and powder bushings. Loads 2 3/4" and 3" shells.Brand: LeeUPC: 734307900113MPN: 90011Department: ReloadingModel: Load-All II

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.Brand: LeeUPC: 734307902728MPN: 90272Department: ReloadingModel: Shell...

Lee's Carbide 3-Die Set for handgun calibers consists of a full-length sizing die (requires case lubrication), bullet seating die, and powder through expander die. It includes a Universal Shell...

Lee 41 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.270 to 1.290 inches.Brand: LeeUPC:...

Lee 260 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.015 to 2.035 inches.Brand: LeeUPC:...

Lee 38 Special Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.135 to 1.155 inches.Brand:...

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee 10MM AUTO Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length .982 to .992 inches.Brand: LeeUPC:...

Lee 7.7 JAP Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.250 to 2.270 inches.Brand: LeeUPC:...

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.Brand: LeeUPC:...