Lee

The Breech Lock Hand Press is a full size reloading press with an overall length of 11.5". It gives you plenty of stroke with lots of power to handle the largest magnum cartridges. One Breech Lock...

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

The 40th Anniversary Pack contains Lee Challenger III Reloading Press and FREE 38 Special | 357 Magnum Breech Lock Carbide 3-Die Set. The Challenger III Reloading Press, the "O" frame press by design...

The 40th Anniversary Pack contains Lee Challenger III Reloading Press and FREE 45 ACP Breech Lock Carbide 3-Die Set. The Challenger III Reloading Press, the "O" frame press by design is the strongest...

The Load-All II can be easily and economically converted to another gauge with the conversion kit. The entire die carrier is replaced so no adjustments are needed. The conversion kit includes the die...

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee's 450 Bushmaster Factory Crimp Die in 7/8 x 14" thread.Brand: LeeUPC: 734307911676MPN: 91167Department: ReloadingCaliber: 450 BushmasterModel: Factory

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee's 7mm PRC Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp...

Lee's 350 Legend Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit. Trim to length...

Lee Loader is a complete reloading system, kit includes everything needed to reload 243 Win, except plastic or wood mallet. Please note: The Classic Lee Loader neck sizes only. This is not...

Lee Loader is a complete reloading system, kit includes everything needed to reload 44 Mag. except a rubber mallet.Brand: LeeUPC: 734307902605MPN: 90260Department: ReloadingCaliber: 44 Rem MagModel:...