Lee

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.Brand: LeeUPC:...

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.Brand: LeeUPC:...

Lee Precision 92220 Micrometer Bullet Seating Die Black/Clear 223 Rem Rifle FirearmBrand: LeeUPC: 734307922207MPN: 92220Department: ReloadingModel: Micrometer

Includes the Breech Lock Challenger Press and three Breech Lock quick change bushings. You get a complete powder handling system, with the most convenient and repeatable perfect powder measure. Plus...

The Breech Lock Challenger press with the "O" frame is the strongest style press. The larger than average 4" opening allows for maximum hand clearance. The spent primer catcher is positive and allows...

Chamfers and deburrs inside and outside of case necks. Must be used after case trimming and can also be used to remove the crimp from primer pockets of G.I. brass.Brand: LeeUPC: 734307901097MPN:...

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee 30/30 WIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.019 to 2.039 inches.Brand: LeeUPC:...

Lee 300 SAVAGE Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.851 to 1.871 inches.Brand:...

Lee 338 WIN MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.480 to 2.500 inches.Brand:...

Lee's 7mm PRC Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit.Brand: LeeUPC:...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.Brand:...