Lee

Lee's ignot mold casts 1/2 and one pound ingots and is ideal for remelting and alloying. It is constructed of aluminum with a wood handle that stays cool.Brand: LeeUPC: 734307900298MPN:...

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.Brand: LeeUPC: 734307909543MPN:...

Lee 220 SWIFT Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.185 to 2.205 inches.Brand: LeeUPC:...

Lee liquid alox gives better accuracy because it eliminates leading and coats the entire bullet just like a thin jacket. Easy to apply and eliminates the need for sizing of most cast bullets. While...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.Brand: LeeUPC: 734307902100MPN: 90210Department: ReloadingModel: Shell...

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.Brand: LeeUPC: 734307909550MPN:...

Lee 6MM REM / 244 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.213 to 2.233 inches.Brand:...

Lee 8X57 MAUSER Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.220 to 2.240 inches.Brand:...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.Brand:...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.Brand:...

Lee's Six Cavity Mold is made for heavy duty volume production. The mold blocks have steel bushing and alignment pins for lasting precision. Included is a cam operated sprue plate to eliminate the...